New Product Announcement
O2 Conserver Checker
A new device for checking the function of oxygen conserver type devices including portable concentrators. Also check other supplemental oxygen systems for flow and oxygen concentration. Check the pulse volume delivered with each breath and the pressure required to trigger a pulse. Also check the flow rate of continuous flow modes. There is also an ultrasonic oxygen concentration sensor for checking the oxygen purity output from concentrators. For pricing and purchasing information send an email using the contact link.
| product_specifications_rev_d.pdf |
| operating_instructions_rev_f.pdf |
Companion Software for O2 Conserver Checker
The O2 Conserver Checker Monitor Software is a Windows program that connects to the O2 Conserver Checker over a Bluetooth connection. Measurements that are made on the O2 Conserver Checker are transmitted to the PC and the data is then presented in a table and on real time graphs. Data can also be streamed to a file for saving data.
Suggested test points and pass/fail limits for each test are included for a variety of current portable concentrators. By loading the test parameter file the program will guide the user in testing a product and for each test a pass or fail indication is provided. After all the tests are completed, a report is saved as a PDF file and can be printed.
A demo version of this software along with the installation instructions and operating manual can be downloaded by clicking on the link below. This will ask for contact information and then a zip file which contains all of the files needed can be downloaded. The demo version will operate for one month so you can test it with a unit and try out the various functions. Contact aaron@dirksinstruments.com about a license key.
Suggested test points and pass/fail limits for each test are included for a variety of current portable concentrators. By loading the test parameter file the program will guide the user in testing a product and for each test a pass or fail indication is provided. After all the tests are completed, a report is saved as a PDF file and can be printed.
A demo version of this software along with the installation instructions and operating manual can be downloaded by clicking on the link below. This will ask for contact information and then a zip file which contains all of the files needed can be downloaded. The demo version will operate for one month so you can test it with a unit and try out the various functions. Contact aaron@dirksinstruments.com about a license key.
|
| |||||
|
|
|
|
 Machining and Manufacturing  Low Volume Manufacturing and Assembly  Product Testing and Clinical Support |
